KATRON TECHNOLOGIES, INC.

DP-200

Card Type              Network Interface Card
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Available
Network Transfer Rate  100Mbps/10Mbps
Topology               Star bus
Wiring Type            Unshielded twisted pair
Data Bus               32-bit PCI

[Image]

           CONNECTIONS

    Function          Label

  UTP connector        CN1

                             DIAGNOSTIC LED(S)

    LED         Status                        Condition

   LED1           On          Data is being transmitted/received between
                                     adapter and 100BASE-TX hub.

   LED1           Off           Data is not being transmitted/received
                                 between adapter and 100BASE-TX hub.

   LED2           On          Data is being transmitted/received between
                                      adapter and 10BASE-T hub.

   LED2           Off           Data is not being transmitted/received
                                  between adapter and 10BASE-T hub.

   LED3           On          Data is being transmitted/received between
                                           adapter and hub.

   LED3           Off           Data is not being transmitted/received
                                       between adapter and hub.

   LED4        Blinking               Network traffic is present

   LED4           Off                No traffic for either speed